X

HARD Semi-Trailed Subsurface Plows of KPP-5, KPP-7 series

Description

KPP Series Cultivators are two-wheeler units intended for autumn solid tillage used with any types of tractor lift hitch.

Cultivators are used in all agro-climatic zones, including those prone to wind and water erosion, on all types of soils, except for sandy loam.

 

Sound “PRO” Arguments for HARD Semi-Trailed Subsurface Plows of Series KPP:

 

PLOW FRAME:

The frame design employs thick-walled profile pipes made of 09Г2С steel and the same steel is used for racks; the material is distinguished by excellent weldability and increased strength, which made it possible to increase the load on the tools and expand the technological capabilities of the cultivators;

The extended base of the cultivator increases the accuracy of the working depth and the quality of leveling the field surface;

The adjustment of the working depth is stepwise, and the adjustment of the angle of attack of the tools is stepless.

 

TOOLS:

  • Arrangement of tines on cultivators provides optimal overlap between the tools and reduces the likelihood of clogging the cultivator with plant residues and adhesion of soil to the wheels of the machine running on an untreated background, ensures stability of the working depth, optimizing the load on the tools and the plow frame;
  • Modern methods of tools (racks, chisels, knives) hardening have significantly increased their service life, productivity, reduced traction resistance and consumption of fuels and lubricants per treated hectare.

RIGGING:

  • The use of KPP cultivators ensures:
  1. almost 100 % preservation of the stubble without any additional rigging, which is important for the fields prone to wind erosion;
  2. at least 70% preservation of the stubble in the subsurface soil layer with additional rigging which is important for fighting soil erosion;
  • The use of additional rigging with dia. 560 mm disc batteries enables:
  1. extra milling of subsurface soil layer, 6…14 cm;
  2. high-quality mixing of crop residues with soil;
  3. additional induction of weed germination;
  4. field leveling.

 

 

РАМА

  • В конструкции рамы использованы толстостенные профильные трубы из стали 09Г2С из этой же стали изготавливаются стойки, данный материал отличается прекрасной свариваемостью и повышенной прочностью, что позволило увеличить нагрузку на рабочие органы и расширить технологические возможности культиваторов;

  • Расстановка стоек на культиваторах обеспечивает оптимальное перекрытие между рабочими органами и снижает вероятность забивания культиватора растительными остатками и налипание почвы на колеса машины, идущей по необработанному фону, обеспечивает стабильность глубины обработки, оптимизируя нагрузку на рабочие органы и рамы культиватора;
  • Расширенная база культиватора повышает точность глубины обработки и качество выравнивания поверхности поля;

  • Регулировка глубины обработки — ступенчатая, а регулировка угла атаки рабочих органов -  бесступенчатая;

РАБОЧИЕ ОРГАНЫ

 

 

 

 

 

 

  • Стойка КПГ/КПП в сборе со сбоной лапой 1000 мм
  • Современные методы упрочнения рабочих органов (стойки, долота, ножи) значительно увеличили их срок эксплуатации, производительность, снизили тяговое сопротивление и расход ГСМ на обработанный гектар.

НАВЕСНОЕ ОБОРУДОВАНИЕ:

  • Диск бороны батареи катков КПГ/КПП 560 мм
  • При использовании культиваторов КПП:

- без дополнительного навесного оборудования обеспечивается практически 100 % сохранения стерневого фона, что очень важно для полей, подверженных ветровой эрозии;

- с дополнительным навесным оборудованием обеспечивается не менее 70% сохранения стерневого фона в поверхностном слое, что немаловажно в борьбе с почвенной эрозией;

  • Дополнительного навесного оборудования с дисковыми батареями с дисками диаметром 560 мм выполняет:

- дополнительное измельчение почвы в поверхностном слое, 6…14 см;

- качественное перемешивание пожнивных остатков с почвой;

- дополнительное провоцирование прорастание сорняков;

- выравнивание поля;

Specifications

Parameter name

KPP-5

KPP-7

Operating width, m

5,3

7,5

Productivity per 1 hour of basic time (at the speed of 12 km/h) ha, not less than

5

7

Number of cultivator tines, pcs.

5

7

Operating width of the assemblable hoe, m

1

Distance between tines, mm

2000

Operating depth with a flat hoe, cm

16-30

Operating speed, km/h

Up to 12

Transport speed, km/h

Up to 20

Dimensions in the working position, mm:

length

5970

5970

width

5300

7300

height

1500

1500

Dimensions in the transport position, mm:

length

5970

5970

width

5300

7300

height

1800

1800

Weight, kg

4000

5500

Service life, years

7

Number of operating staff, persons

1

Recommended drawbar category of tractors, p.f.

6-7

8-9

Download operating manual
Other models
Preliminary order
Organization name*Region*Contact person*Phone*EmailTechnology name*Shiping methodTerms of delivery
Have you previously purchased Featagro products?*

* - fields are required

By submitting this form, you acknowledge that you have read and agree with all clauses of the user agreement and consent to the processing of your personal data in accordance with Federal Law No. 152-FZ of July 27, 2006 “On Personal Data”, on the conditions and for the purposes identified by this Privacy Policy.

Send order